- Fixed an issue that caused file numbering to be reset to 0001 when all pictures were deleted even if settings had not been reset using Reset all. - Fixed an issue that in rare cases caused banding in pictures. - Fixed an issue that resulted in difficulty focusing on subjects in the center of the frame if the scene auto selector chose Close-up mode.
Viewing the Camera Firmware Version:
- Turn the camera on. - Tap MENU in the monitor and then tap the setup icon. - Tap Firmware version in the setup menu to display the camera firmware version. - Check the camera firmware version. - Turn the camera off.
Updating the Camera Firmware:
- Create a folder on the computer hard disk and name it as desired. - Download and run the downloadable file to extract the firmware to a folder named “S6900Update”. - Using a card slot or card reader, copy the “firmware” folder to a memory card that has been formatted in the camera. - Insert the memory card into the camera and turn the camera on. - Tap Firmware version in the setup menu and follow the on-screen instructions to complete the firmware update. - Once the update is complete, turn the camera off and remove the memory card. - Confirm that the firmware has been updated to the new version.
About Digital Camera Updates:
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
Like it? Share with your friends!
Other Windows Software of Developer «Nikon»:
Nikon COOLPIX L30 Camera Firmware Fixes: - Reduced the occurrence of an issue which in rare circumstances resulted in the camera not recovering from lens errors when restarted.How to verify your camera’s current firmware version: - Turn on the camera. - Press the MENU button to displ
Nikon D5200 Camera Firmware Changes: - Reduced noise (horizontal lines) in movies shot with 1280×720@60p or 1280×720@50p selected for Frame size/frame rate. - Fixed an issue with the camera freezing when the Clean image sensor option was used.Viewing the Camera Firmware V
Nikon UT-1 Communication Unit Firmware Fixes:- The D810A is now supported.The following cameras can be used to update UT-1 firmware.- The D810, D810A, D750, D7200, and D7100- D800 and D800E firmware versions “A” 1.10/“B” 1.10 or later.Confirming firmware version: - Conne
Nikon 1 V2 Camera Firmware Fixes: - Fixed issue that caused Eye-Fi wireless upload to stop functioning if a control other than the movie-record button was used to end filming when movies were being recorded to an Eye-Fi card.Notice: - Updating the firmware may reset the camera clock
Nikon COOLPIX S9700 Camera Firmware Fixes: - In some rare cases, the camera would freeze when it was turned on after USB charging completed. This issue has been resolved. - In some rare cases, the lens would automatically zoom in and the camera would freeze when it was turned on. This issue
Nikon D3200 Camera Firmware Changes: - Addressed an issue that caused the memory card access lamp to light longer than normal or the message “This memory card cannot be used. Card may be damaged. Insert another card” to be displayed while the memory card was accessed.Came
Nikon COOLPIX S6700 Camera Firmware Changes: - Fixed an issue that in rare circumstances caused the camera to freeze with the lens extended when the power was turned on.Viewing the Camera Firmware Version - Turn the camera on. - Press the camera MENU button to display the menus. - Press the
Capture NX CaptureNX 2 improves upon Nikon's original photo editing software, designed for photographers by photographers. Color Control Points let you select and adjust the color by pointing, clicking and adjusting a slider or two. Capture NX offers 25 adjustments f
Nikon COOLPIX S3600 Camera Firmware Changes: - Fixed an issue that in rare circumstances caused the camera to freeze with the lens extended when the power was turned on.Viewing the Camera Firmware Version: - Turn the camera on. - Press the camera MENU button to display the menus. - Press the
Ricoh Pentax Digital Camera Firmware Update Utility Changes:- Added Diffraction Correction on Lens Correction. For captured image file that is corresponding camera and lens.- Added Fringe Correction on Lens Correction. For captured image file that is corresponding camera and lens.- Added ON/OFF setting for
Hasselblad H5D-40 Camera Body Firmware This package contains firmware version 3.3.3/1.1.5 for the H5D camera body.Fixes: - Solves a rare issue where a short extra delay could be added to the exposure sequence - Internal production supportInstallation steps:1. In order to perform the update
Microsoft LifeCam VX-5000 Driver for Vista/Windows 7 64-bit The package provides the installation files for Microsoft LifeCam VX-5000 Driver version 188.8.131.52.In order to manually update your driver, follow the steps below (the next steps):1. Go to Device Manager (right click on My Computer, choose Manage and then
Toshiba Portege Z830 Webcam Driver for Windows 7 This driver and software is needed to use the integrated webcam.Important Notes- During the installation of this file, be sure that you are logged in as the Administrator or as a user with Administrative rights.- To ensure that no other program interferes
SmallHD AC7 LCD/LCD-SDI Field Monitor Firmware Attention!- There are 2 different sets of firmware for the AC7 LCD/LCD-SDI. If your monitor has a D in the serial number you need to download the firmware from mirror link 2. The name of the firmware version will end in “D”.Fixes: - Improv
Gigabyte GA-MA78LMT-S2 (rev. 1.0) Microsoft UAA Driver Specifications:CPU: - Support for AM3 processors: AMD Phenom II processor/ AMD Athlon II processor Hyper Transport Bus: - 5200 MT/s Chipset: - North Bridge: AMD 760G - South Bridge: AMD SB710 Memory: - 2 x 1.5V DDR3 DIMM sockets supporting up to 8 GB of s
Hasselblad H2D-22 Camera Body Firmware This package contains firmware version 2.3.3/16.0.8 for H2D, H3D and H3DII, H4D camera bodies. Fixes:- If the tethered camera was in B or T-mode and exposure mode was changed from Phocus, exposure time on the camera was not updated correctly. This is
SJCAM SJ5000x Elite Action Camera Firmware SJCAM Firmware Update Instructions:1. Format the MicroSD Card, unzip the firmware file.2. Copy the firmware file(s) (.bin) onto the root of the MicroSD Card3. Connect the camera with charger, the camera will be upgraded automatically4. After the firmware u
Bushnell Trophy Cam 119445c Camera Firmware This package provides the necessary installation files of Bushnell Trophy Cam 119445c Camera Firmware BS680BWNx02020.Note:- This is the US Model of Bushnell Trophy Cam 119445 cameraInstallation steps:1. Save downloaded files to a blank SD Card (16GB card o
Supported Operating Systems:
Windows 7 |
Windows 8 |
Windows Vista |
Comments on Nikon COOLPIX S6900 Camera Firmware:
Comments not found
Windows Software - Free Windows Downloads, Apps, Games, Freeware, Skype, Media Player, Antivirus, Gimp, Live, Starter for Windows XP, Vista, 7, 8, 10