This package includes a customized firmware developed by Padavan that is targeted at some of ASUS’ routers. The present build brings new improvements, functions, bug fixes, and configurations, and can also boost the overall performance of the device.
1) After the first upgrade from official firmware, all settings will be erased. Do not load settings (CFG file) from official firmware!!!
2) After upgrade from any official ASUS firmware, WAN MAC address for RT-N14U is dynamically changed (not permanent) in last octet. Please check MAC binding from your ISP.
3) If your current custom firmware version is N56U 184.108.40.206-006 or lower, it is absolutely necessary to save your settings to a .CFG file using WebGUI BEFORE upgrading to a newer version. After the upgrade, restore your settings from the saved .CFG file in a usual way.
DLNA + Transmission build Description:
[x] Linux kernel-3.0.101+ (with upstream backports).
[x] IPv6 full support (native and SIT tunnels).
[x] NTFS filesystem (Paragon ufsd 8.6 for ASUS).
[x] FAT16/FAT32/exFAT filesystem (FAT16/FAT32 via exFAT driver).
[x] EXT4/EXT3/EXT2 filesystem (EXT3/EXT2 via EXT4 driver).
[x] FUSE kernel modules.
[x] UVC camera kernel modules.
[x] NFS kernel modules (NFSv2/3 client/server).
[x] IPSET kernel modules.
[x] LPR printing daemon.
[x] USB-over-Ethernet printing daemon.
[x] dropbear (SSH client/server).
[x] sftp (SSH FTP server).
[x] vsftpd (FTP server).
[x] samba (SMB server).
[x] xupnpd (multicast IPTV->UPnP proxy).
[x] openvpn (security VPN client/server).
[x] https server for WebUI.
[+] minidlna (UPnP/DLNA A/V mediaserver).
[+] transmission (torrent client).
[-] firefly (iTunes audio mediaserver).
[-] aria2 (multi-protocol download manager).
[-] transmission web control (advanced WebUI for transmission).
[-] QoS kernel modules.
[-] IFB/IMQ kernel modules.
[-] USB HID kernel modules.
[-] XFS filesystem.
[-] CIFS client kernel modules.
[-] openssh (BSD SSH client/server).
[-] openssl binary (allow generate certificates for openvpn/https).
[-] tcpdump utility.
[-] parted utility.
[-] Stripped debug messages from Samba server.
- [x] > Mandatory
- [+] > Included
- [-] > Excluded
About Router Firmware:
Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.
Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.
In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.
If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.
If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.
If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.
|TP-Link TL-WR841N V9 Router Firmware|
300Mbps Wireless N Router- 300Mbps wireless speed ideal for interruption sensitive applications like HD video streaming- Two antennas greatly increase the wireless robustness and stability- Easy wireless security encryption at a push of WPS button- IP base
|TP-Link TL-WR841HP V1 Router Firmware|
300Mbps High Power Wireless N Router- High power amplifier and two detachable external 9dBi high gain antennas provide superior wireless range- Enhanced Wi-Fi signal cuts through walls and obstacles, eliminating dead zones- Excellent wireless speed over lo
|Peplink Balance 30 LTE Router Firmware|
Important Notices for Firmware 6.2.1 - Internal Network Firewall Rules Will Need to Be Reconfigured: To increase protection for traffic running between internal networks, Firmware 6.2.1 introduces the new “Internal Network Firewall Rules” table
|MikroTik RouterOS x86 Firmware 6.33 RC|
|DIGICOM DG-5524T Router|
This package contains the files needed for installing the DIGICOM DG-5524T Router Firmware. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible a
|TP-Link TL-SG2424P V1 Switch Firmware|
24-Port Gigabit Smart PoE+ Switch with 4 Combo SFP Slots- Supports 24 802.3at/af-compliant POE+ ports with a total power supply of 180W- Integrated security strategy including 802.1Q VLAN, Port Security and Storm control help protect LAN area investment- L
|TP-Link TL-SL2218 V1 Switch Firmware|
6-Port 10/100Mbps + 2-Port Gigabit Smart Switch- 16 10/100Mbps RJ45 Ports, 2 10/100/1000Mbps RJ45 Ports and 2 Combo Gigabit SFP Slots- Integrated security strategy including 802.1Q VLAN, Port Security and Storm control help protect LAN area investment- L2/
|Emerson Avocent MPU1016 KVM Over IP Switch Firmware|
This package provides the necessary installation files of Emerson Avocent MPU1016 KVM Over IP Switch Firmware version 1.30.5.Fixes:- Java KVM session freezes after exiting Map Smart Card window and attempting to reopen- Updated JAVA and Active X viewer cer
|CenturyLink Technicolor C1100T WiFi Modem Firmware|
1. To start the firmware upgrade, open a web browser and go to http://192.168.0.1 or http://modem.
2. Login to your modem by doing the following:
- Enter the Administrator Username: admin (bottom of the modem)
- Enter the Administrator Pa
|Dovado GO Router Firmware|
New 4G USB Modems: - ZTE MF831 - Huawei E3372 (Play-Poland) - Huawei E3372h (Play-Poland) - ZTE MF823 (Play-Poland)New 3G USB Modems: - Huawei MS2131 - Huawei E3131h-2EW (VIP-Croatia)